🇺🇸 Proudly American · Family-Owned Free Estimates · Same-Day Service · Serving Florida
Chimney Brothers Co
(645) 224-9996
Chimney Rebuild · Coral Springs, FL

Chimney Rebuild in Coral Springs, FL

Looking for chimney rebuild in Coral Springs? Chimney Brothers Co is your local, family-owned Coral Springs team — honest assessments, upfront pricing, and same-day service when it's urgent.

Call (645) 224-9996
★★★★★ 4.9/5 318 reviews · Trusted by Florida homeowners
Family Owned & OperatedFree EstimatesUpfront PricingSame-Day Service Available
Get a Free EstimateTakes about 30 seconds

No obligation · Or call (645) 224-9996

What You Can Count On

Free, Upfront Estimates

No trip charge and no hidden fees — you get a clear price before any work starts.

Same-Day Service

Urgent leak or a failed inspection? We can often get to you the same day.

Family-Owned & Local

A local Florida team that treats your home like our own and stands behind the work.

Full chimney rebuilds in Coral Springs are less common than targeted repairs, but when a masonry chimney has been neglected through enough wet seasons, partial or full reconstruction becomes the honest answer. The homes most likely to need a rebuild are the older masonry properties near the Country Club and along the established parkway neighborhoods — stacks where the original mortar has deteriorated through decades of Broward's heat and humidity, and where past patch work using the wrong mortar type has accelerated the damage rather than slowing it.

Chimney Rebuild: What the Work Looks Like

The kind of chimney rebuild work we handle for Coral Springs homeowners — swipe to see more.

What Our Chimney Rebuild Service Includes

Partial or Full Rebuild

We rebuild only what's failed — often the section above the roofline — to keep cost sensible.

New Crown & Cap

A rebuild is finished with a properly-sloped crown and a fitted cap to keep water out.

Structural Soundness

The rebuilt masonry is laid to be straight, stable, and safe to use.

Honest Scope

If a repair would do the job, we'll say so — a rebuild is only for when it's truly needed.

Why Coral Springs Homes Need Chimney Rebuild

What pushes a chimney from repair territory into rebuild territory is usually a combination of factors: mortar joints that have receded so deeply that water is entering the brick cores, spalled brick faces where the masonry surface has flaked away, a crown that is too far gone to patch, and sometimes structural movement at the base where the stack meets the roofline. South Florida's expansive soils and the thermal cycling between our cool-season and wet-season temperatures contribute to that kind of movement over time. When the damage is widespread rather than isolated, rebuilding from the roofline up gives a far better long-term result than stacking patches on a compromised structure.

A rebuild from the roofline up starts with full removal of the deteriorated sections down to stable masonry. We then rebuild using mortar formulated for a wet, warm climate — harder pre-mixed mortars commonly used in drier northern states are too rigid for Florida's humidity cycles and will crack faster than appropriate mixes. Brick selection matters in Coral Springs too; we use properly rated face brick rather than the softer common brick that was sometimes used in older construction. The crown and cap are set as part of the same scope so the finished top sheds water correctly from day one.

A rebuild is a significant job and we treat it that way. We assess the full scope honestly before we quote, show you exactly what needs to come down and why, and give you a clear picture of what the finished stack will involve. For Coral Springs homeowners with a seriously deteriorated chimney, a proper rebuild is the fix that actually holds — not another layer of patch work that the next wet season will undo.

Signs You Need Chimney Rebuild

  • Large areas of crumbling, flaking, or missing brick
  • The chimney is visibly leaning, bowing, or separating from the home
  • Big sections of mortar are gone and bricks feel loose
  • Repeated repairs that no longer hold because the masonry is too far gone

How It Works

Call or Request a Quote

Tell us what's going on with your Coral Springs chimney or fireplace and we'll set a time that works.

Free On-Site Assessment

We come out, find the real cause, and give you honest, upfront pricing — no obligation.

Done Right, Fast

We finish the work cleanly and confirm everything is safe and ready to use.

Chimney & Fireplace Services in Coral Springs

Your local Coral Springs team for everything your chimney and fireplace need.

🇺🇸
Proudly American — Family-Owned & Operated A local Florida team that treats your home like our own.
100% Free · No Obligation

Get Your Free Estimate in Coral Springs

Tell us what's going on — a leak, a crack, a failed inspection, or a cleaning — and we'll give you honest, upfront pricing.

Family-Owned Upfront Pricing Same-Day Available
Call (645) 224-9996

Request a Free Estimate

Takes less than 30 seconds.

No obligation. We'll get back to you shortly · Or call (645) 224-9996

Chimney Rebuild in Coral Springs — Common Questions

Do I need a full rebuild or just a repair?

Most chimneys can be repaired. A rebuild is for when the masonry has deteriorated so much that a repair wouldn't be safe or wouldn't last. We assess it honestly and show you the condition before recommending anything.

Can you rebuild just the top of the chimney?

Often, yes. Damage is frequently worst above the roofline where the masonry is most exposed, so a partial rebuild of that section is common and keeps the cost down compared to a full rebuild.

Will the new brick match my existing chimney?

We match the brick and mortar as closely as possible so the rebuilt section blends with the rest of the home. We'll talk through the options with you before starting.

Why does my Coral Springs chimney leak when it rarely gets very cold here?

Most chimney leaks in Coral Springs have nothing to do with cold and everything to do with water. We're inland in northwest Broward, so the issue isn't coastal salt, it's the months of high humidity and the heavy daily thunderstorms during the wet season. That water gets in through a cracked crown, worn or poorly sealed flashing where the chimney meets the roof, failed mortar joints, or a missing or corroded cap. Over time the brick and crown develop hairline cracks that widen with the constant heat-and-rain cycle. We inspect to find the actual entry point, then handle the leak and flashing repair, crown repair, or cap replacement needed to stop it, rather than just sealing the surface and hoping.

How tall does a chimney have to be above the roof?

Chimneys shall extend not less than 2 feet higher than any portion of a building within 10 feet, but shall be not less than 3 feet above the highest point where the chimney passes through the roof. That is the exact wording of IRC section R1003.9, adopted verbatim as R1003.9 of the Florida Building Code, Residential. It is commonly called the 3-2-10 rule, and both conditions must be met at once, so whichever produces the greater height controls. The 10-foot measurement is horizontal and includes ridges, dormers, adjacent walls and nearby structures. Source: International Residential Code section R1003.9, adopted as Florida Building Code, Residential R1003.9

How much does a chimney rebuild cost in Coral Springs?

An above-roofline partial rebuild runs $1,500–$4,000 in Florida, $3,000–$7,000 or more if the liner is repaired or replaced at the same time, and $5,000–$15,000 or more for an extensive or full rebuild. What a specific Coral Springs job costs comes down to chimney height, roof access and pitch, and the condition of the crown and flashing, so we give a free on-site estimate with upfront pricing before any work begins. See the full cost breakdown.

How much rain does a South Florida chimney actually take?

Miami International Airport averages 67.41 inches of precipitation a year, Fort Lauderdale-Hollywood 60.95 inches and West Palm Beach 61.75 inches, based on the NOAA 1991-2020 U.S. Climate Normals. Much of that falls as heavy convective rain in the May-through-October wet season, and it arrives on a wind-driven slant rather than straight down, which is exactly the condition that drives water into an unsealed crown joint, a face-nailed counter flashing or an uncapped flue. The Atlantic hurricane season runs June 1 through November 30 and peaks around September 10. That overlap is why crown, cap and flashing condition matters more in Florida than sweeping frequency does. Source: NOAA National Centers for Environmental Information, 1991-2020 U.S. Climate Normals (stations USW00012839, USW00012849, USW00012844); NOAA National Hurricane Center season climatology

Nearby areas we serve: Parkland · Tamarac · Margate · North Lauderdale · Coconut Creek · Lauderdale Lakes

More: Chimney Rebuild across Florida · All service areas

Coral Springs neighborhoods: Ramblewood · Eagle Trace · Heron Bay · Turtle Run · Maplewood · Cypress Run · Wyndham Lakes · Kensington
ZIP codes: 33065, 33067, 33071, 33073, 33075, 33076

Call Now