πŸ‡ΊπŸ‡Έ Proudly American Β· Family-Owned Free Estimates Β· Same-Day Service Β· Serving Florida
Chimney Brothers Co
(645) 224-9996
Chimney Leak & Flashing Repair Β· Longwood, FL

Chimney Leak & Flashing Repair in Longwood, FL

Looking for chimney leak & flashing repair in Longwood? Chimney Brothers Co is your local, family-owned Longwood team β€” honest assessments, upfront pricing, and same-day service when it's urgent.

Call (645) 224-9996
β˜…β˜…β˜…β˜…β˜… 4.9/5 318 reviews Β· Trusted by Florida homeowners
Family Owned & OperatedFree EstimatesUpfront PricingSame-Day Service Available
Get a Free EstimateTakes about 30 seconds

No obligation Β· Or call (645) 224-9996

What You Can Count On

Free, Upfront Estimates

No trip charge and no hidden fees β€” you get a clear price before any work starts.

Same-Day Service

Urgent leak or a failed inspection? We can often get to you the same day.

Family-Owned & Local

A local Florida team that treats your home like our own and stands behind the work.

Chimney leaks in Longwood tend to show up during the summer rainy season, when afternoon thunderstorms drive water sideways against the masonry and test every joint and seal. The older brick chimneys in the area's established subdivisions were often flashed with a single layer of step flashing without a counter-flashing embedded in the mortar joints, which was acceptable at the time but does not hold up indefinitely. When that flashing loosens or the mortar holding it erodes, water finds a path inside the wall or ceiling below.

Chimney Leak & Flashing Repair: What the Work Looks Like

The kind of chimney leak & flashing repair work we handle for Longwood homeowners β€” swipe to see more.

What Our Chimney Leak & Flashing Repair Service Includes

Leak-Source Diagnosis

We find where water is actually entering β€” not just where the stain appears.

Flashing Repair & Reseal

The roof-to-chimney flashing re-sealed or replaced where it's failed.

Crown & Cap Sealing

Cracked crowns and missing caps fixed to close the most common top-side leaks.

Masonry Waterproofing

Porous brick and open joints sealed so the wall stops soaking up rain.

Why Longwood Homes Need Chimney Leak & Flashing Repair

What we look for during a leak investigation on a Longwood home includes the condition of the step flashing along the roofline, the counter-flashing where the chimney meets the roof deck, the crown on top of the chimney, and the mortar joints in the upper courses of brick. Florida's heat expands and contracts masonry repeatedly over the years, and hairline cracks in mortar or a crown that was finished too thin will eventually allow water infiltration even if the exterior looks intact.

Our repair approach starts with identifying exactly where water is entering before we touch anything. We re-bed and seal flashing that has lifted, and we apply counter-flashing into cut mortar joints where the original installation lacked it. Crown repairs involve removing failed material back to sound substrate and applying a properly sloped, reinforced finish coat. We do not apply surface sealers as a substitute for actual repairs to flashing or mortar that has failed.

If you have noticed water stains on the ceiling near your fireplace after Seminole County's summer rains, or a damp smell from the firebox area, it is worth having someone look at it before interior damage accumulates. Leak repairs are typically straightforward when caught early and considerably more involved when the water has had time to wick into framing or drywall. We can usually identify the source within a single visit.

Signs You Need Chimney Leak & Flashing Repair

  • Water stains or discoloration on the ceiling or wall near the chimney
  • A musty, damp smell inside the firebox, especially after rain
  • Dripping sounds or visible moisture inside the fireplace
  • Peeling paint, bubbling drywall, or rust on the damper near the chimney

How It Works

Call or Request a Quote

Tell us what's going on with your Longwood chimney or fireplace and we'll set a time that works.

Free On-Site Assessment

We come out, find the real cause, and give you honest, upfront pricing β€” no obligation.

Done Right, Fast

We finish the work cleanly and confirm everything is safe and ready to use.

Chimney & Fireplace Services in Longwood

Your local Longwood team for everything your chimney and fireplace need.

πŸ‡ΊπŸ‡Έ
Proudly American β€” Family-Owned & Operated A local Florida team that treats your home like our own.
100% Free Β· No Obligation

Get Your Free Estimate in Longwood

Tell us what's going on β€” a leak, a crack, a failed inspection, or a cleaning β€” and we'll give you honest, upfront pricing.

Family-Owned Upfront Pricing Same-Day Available
Call (645) 224-9996

Request a Free Estimate

Takes less than 30 seconds.

No obligation. We'll get back to you shortly Β· Or call (645) 224-9996

Chimney Leak & Flashing Repair in Longwood β€” Common Questions

Why is my chimney leaking only when it rains hard?

That's typical of a flashing or crown leak β€” the entry point only takes on water under heavy, wind-driven rain, which Florida gets plenty of. It doesn't mean the problem is minor; it means we need to find the exact entry point, which is what we do.

Can you fix a chimney leak without rebuilding the chimney?

In most cases, yes. The majority of leaks come from flashing, the crown, the cap, or porous masonry β€” all of which can be repaired and sealed without a rebuild. We only suggest bigger work if the masonry itself has failed.

How fast should I deal with a chimney leak?

Quickly. Water damage compounds β€” what starts as a small leak turns into rotted framing, ruined drywall, and damaged masonry. For active leaks we can often come out the same day.

How often should a chimney in Longwood be cleaned and inspected?

Once a year is the right starting point for any chimney that sees regular use. Even if your fireplace only gets used on the cooler nights that Longwood does get from roughly November through February, an annual cleaning and inspection keeps creosote from accumulating and catches small mortar or liner problems before they grow. If the fireplace rarely gets used, inspections matter just as much β€” a chimney that sits idle through Florida's humid summers can still develop flashing leaks, crown cracks, and critter intrusion.

What does code require for chimney flashing, and why does flashing leak?

Base and counter flashing must be corrosion-resistant metal of at least the thickness in IRC Table R903.2.1, which is 0.0179 inch for galvanized steel (26 gage) and 0.024 inch for copper, or mineral-surfaced roll roofing weighing at least 77 pounds per 100 square feet for base flashing. Flashing is a two-part system: base flashing that laps under the roof covering and counter flashing that is let into the masonry and laps over the base. Leaks come from caulk used in place of counter flashing let into a mortar joint, from reusing old flashing when a roof is replaced, and from base and counter flashing being run as one piece so the roof and chimney cannot move independently. CSIA describes flashing as the seal that prevents rainwater from running down the chimney into living spaces. Source: Florida Building Code, Residential sections R905.2.8.1 and Table R903.2.1; CSIA water damage guidance

Do Florida fireplaces get used enough to matter?

Barely, by the numbers: Miami averages 103.6 heating degree days a year, Fort Lauderdale 121.9 and West Palm Beach 201.8, against 1,227.6 for Jacksonville, per the NOAA 1991-2020 Climate Normals. A South Florida fireplace may see only a handful of burn hours a season, so creosote accumulation is genuinely slow compared with a northern chimney. The chimney itself, though, is exposed to sun, rain, humidity and salt 365 days a year, and a flue that sits idle for eleven months is the one most likely to hold a bird or squirrel nest, a wasp nest or a blocked-off damper. That is the reason the annual NFPA 211 inspection interval still applies here even when sweeping does not come due. Source: NOAA National Centers for Environmental Information, 1991-2020 U.S. Climate Normals, annual heating degree day normals (base 65 F)

How much does chimney leak repair cost in Longwood?

Flashing repair, the most common source of a chimney leak, runs $200–$600 in Florida, and crown repair or replacement runs $200–$1,000. What a specific Longwood job costs comes down to chimney height, roof access and pitch, and the condition of the crown and flashing, so we give a free on-site estimate with upfront pricing before any work begins. See the full cost breakdown.

Nearby areas we serve: Winter Springs Β· Casselberry Β· Altamonte Springs Β· Lake Mary Β· Maitland Β· Eatonville

More: Chimney Leak & Flashing Repair across Florida Β· All service areas

Call Now