Many West Melbourne homes built in the 1990s and 2000s have framed chases rather than masonry chimneys — a wood-framed, stucco-sided structure housing the flue pipe for a factory-built fireplace. These chases look solid from the outside but are vulnerable to water intrusion in ways that brick chimneys are not. The stucco exterior can crack and allow moisture behind the surface, and the chase cover at the top — typically thin galvanized steel — rusts through in Florida's humidity within ten to fifteen years.
Chimney Chase Repair: What the Work Looks Like
The kind of chimney chase repair work we handle for West Melbourne homeowners — swipe to see more.
What Our Chimney Chase Repair Service Includes
Chase Cover Replacement
Rusted or pooling chase covers replaced with a properly-sloped, fitted cover.
Seam & Seal Repair
Leaking seams and penetrations on the chase sealed to stop water entry.
Chase & Framing Repair
Moisture-damaged framing and siding on the chase structure repaired.
Storm-Ready Finish
Built to handle wind-driven rain so the prefab system stays dry.
Why West Melbourne Homes Need Chimney Chase Repair
When a chase cover fails, water enters the top of the chase and sits against the wood framing, the insulation around the flue pipe, and the interior of the firebox. Because the damage is hidden inside a closed structure, homeowners often don't notice until there is significant rot in the framing, rust streaking inside the firebox, or a soft spot developing in the ceiling or wall below. By the time it's visible, the repair is larger than it needed to be.
Chase repairs typically start with the cover — we remove the rusted original and replace it with a stainless steel unit fitted with a proper flue collar and overhang that sheds water away from the chase exterior. If the stucco has cracked or separated, we address the surface and seal it to prevent re-entry. Where the framing has sustained moisture damage, we repair or sister the affected members before closing the structure back up.
If you have a stucco-sided chase and haven't had the cover inspected, it's worth doing before Brevard County's rainy season. A rusted-through cover is an inexpensive fix compared to the wood rot and mold remediation that follows a season or two of unaddressed water intrusion inside a framed chase.
Signs You Need Chimney Chase Repair
- Rust streaks running down the sides of a metal-topped chimney chase
- Water pooling on top of the chase cover instead of draining off
- Leaks or stains showing up near a prefab (factory-built) fireplace
- Damaged, soft, or rotting siding on the chase structure
How It Works
Call or Request a Quote
Tell us what's going on with your West Melbourne chimney or fireplace and we'll set a time that works.
Free On-Site Assessment
We come out, find the real cause, and give you honest, upfront pricing — no obligation.
Done Right, Fast
We finish the work cleanly and confirm everything is safe and ready to use.
Chimney & Fireplace Services in West Melbourne
Your local West Melbourne team for everything your chimney and fireplace need.
Chimney Repair in West Melbourne
Cracked crowns, spalling brick, loose mortar, and water damage repaired to last.
Chimney Sweep & Cleaning in West Melbourne
Creosote and debris removed so your fireplace draws cleanly and safely.
Chimney Inspection in West Melbourne
Thorough top-to-bottom inspections — ideal before a sale or after a storm.
Chimney Leak & Flashing Repair in West Melbourne
Stop water at its source — flashing, crown, and cap leaks common on Florida roofs.
Chimney Caps in West Melbourne
New and replacement caps that keep out rain, debris, and nesting animals.
Chimney Crown Repair in West Melbourne
Resealing and rebuilding the concrete crown that protects the top of your chimney.
Chimney Chase Repair in West Melbourne
Repair and rebuild the framed chase and chase cover on prefab chimneys.
Chimney Rebuild in West Melbourne
Full or partial rebuilds when masonry has deteriorated beyond a simple repair.
Tuckpointing & Masonry in West Melbourne
Failing mortar joints raked out and repointed to restore strength and looks.
Fireplace Repair & Service in West Melbourne
Fireboxes, dampers, and surrounds repaired and restored to working order.
Fireplace Installation in West Melbourne
Clean, careful installation of new fireplaces and inserts.
Gas Fireplace Service in West Melbourne
Service and repair for gas fireplaces and inserts, done safely.
Fireplace Restoration in West Melbourne
Bring a tired or damaged fireplace back to a clean, safe, working state.